Hello,I configured the same procedure ;on the CUCM:1. Create new Device Security profile and check the Enable Digest Authentication checkbox.2. Change the Realm String to one u know.3. Add a new Third Party SIP phone (Basic) use the previously Create...
Thank you for your quick reply.Cisco UCM >> Device >> Phone ; I searched Cisco 9971 and I cannot see power negotiation on the CUCM side. But on the switch , this parameter is enable by the default. I will change disable on the switch side.I attached ...
Hello, In my issue;Third-party switch(Enterasys) ---- Cisco 9971 SIP Phone, --- There is not camera option in accessoriesI will change these parameter on switch and CUCM >> Phones.Thanks.
Hi,I made all configuration on CUCM and SIP Phone (Nokia E66).But third party SIP Phone is not register to CUCM.DHCP was not configured on the system.Nokia E66 doesn't have any IP Address. Besides, is it neccessary to configure any access point confi...
