About massimosanto

massimosanto · 03-07-2012

We're testing the reference system shown in the figure below. System DescriptionFour 2960 switches are used for transport;Equipment 1 and Equipment 2 exchange packets for synchronization;To reach synchronization Equipment 1 and 2 must exchange data ...

massimosanto · 04-27-2012

Hi, AgustinNo other news about Cisco configuration.I believe that the issue we found is just a limit and cannot be overcome.I think expedite queue can guarantee the bandwith but not the minimum delay.Sorry for the delay in my answer.Massimo.

massimosanto · 03-19-2012

Hi, AgustinI'm pretty sure the priority queue is queue #1.I verify this condition by applying a shaping on queue#1, inserting a traffic load exceeding shaping limit and then enabling priority queue.In this situation shaping is ignored and all the tr...

massimosanto · 03-14-2012

We tested also the new IOS and nothing is different.In our opinion, priority queue out command ensure us all the bandwith we require but it seems to not guarantee us minimum jitter.Massimo

massimosanto · 03-09-2012

Thank You, DanieleThat's the guide we used to create the configuration described in my first message.But our tests seem to reveal a behaviour of the expedite queue from the one described in the guide.We will install IOS 15 and repeat the tests.Massi...

massimosanto · 03-08-2012

Ciao, DanieleThank You for your answer. Our Version is 12.2.We use 100 Mbit/s ports because for our test purpose we need to saturate a link and we don't have a Gigabit capable traffic generator.But what is different with a Gigabit port? We think tha...

Member Since	‎03-07-2012 02:39 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

Priority queue out handling.

Priority queue out handling.

Priority queue out handling.

Priority queue out handling.

Priority queue out handling.

Priority queue out handling.