Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a fabric containing two Nexus 5548 and a Brocade 5000 switch in interop mode 2. When i make changes to the zoning, the first nexus (the fabric principal) and the brocade switch see the zone changes. The second Nexus switch does not see it. Th...
Hi,just a simple question. Is it possible to use a nexus 5548 UP switch as a layer 3 router between different vlans on the switch without the layer 3 card ? Or is there no 5548 as a router with the layer 3 card ?
We tried the VPN Client version 4.8.2 with Windows Vista and got the following error message :Secure VPN Connection terminated by Peer.Resson 435: Firewall Polidy MismatchLooks like it doesn't like the "Firewall required" setting, but we need this se...
And here comes the active zoneset now (only the beginning because it is quite long and all the rest is identical) :nexus-rz1-a:zoneset name FABRIC1 vsan 10 zone name test vsan 10 * fcid 0x011500 [pwwn 50:0a:09:82:8d:31:2e:19] pwwn 50:0a:09:81:8d...
Opps, clicked wrong. This was not the right answer Here comes the problem. I made a change on nexus-rz1-anexus-rz1-a(config)# show zone status vsan 10VSAN: 10 default-zone: deny distribute: full Interop: 2 mode: basic merge-control: allow sessi...
Ouch, deprecated is not the word i wanted to read We are using 5.1(3)N1(1a) on nexus-rz1-aand 6.0(2)N1(2) on nexus-rz2-a.The fabric can be seen :nexus-rz2-a# show fcs ie vsan 10IE List for VSAN: 10-----------------------------------------------------...
