Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Currently working on a DVPN project and having trouble getting things working correctly. have been working primarily from this document: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_white_paper09186a008018983e.shtml I have 3 sepera...
Hi All,I am currently trying to configure DMVPN for the first time. I have been following the cisco config guide and googling a few other bits however I seem to have hit a brick wall.The setup is in a lab environment so i can post up as much info as ...
Hi All,My current situation is that I am doing a project at university that will be using 3 Cisco ASAs. I have been given two ASA5510s and one ASA5520. They were given to me with version 7.0 images on them with ASDM 5.0, this i was having issues with...
I know it's an old post but I'd like to be able to do the same thing in our environment.Currently we have a Microsoft NPS 2012 server handling dot1x eap-tls authentication for our corporate Wi-Fi and I'd like to extend this functionality for remote a...
Philip,I'm currently using a Wildcard cert on my WLC (WiSM 2), it's working fine for Windows machines but I think I need to install the CA Cert seperately in order to get it working for Android/iPhone
Thanks, I will give that a go over the weekend. Thinking about it, Dynamic routing will probably help me when it comes to my next scenario which uses ASAs alongside the routers.
The first part of the project was creating 4 "Sites" with internet access from the LAN, hence the NAT.The second part is to add DMVPN into the mix so I just built on the original config. Will look over the document and try things that way
Thanks for the help I was following this guide: http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/guide/sec_DMVPN.html#wp1118625I am using NAT, g0/1 on the routers in the LAN interface with a difference 10.x.x.x/24 on each rou...
