About mbj

mbj · 04-10-2012

I have a 3825 router that I have setup with the following:interface GigabitEthernet0/0 no ip address ip flow ingress ip flow egress duplex auto speed auto media-type rj45 negotiation auto no mop enabled service-policy output MARK-PCOM-VIDEOendinterfa...

mbj · 04-25-2012

So I did some layer 1 troubleshooting.....I of course assumed that logically the Router was plugged directly into our core switch....oops. It turns out the last network engineer plugged the router into a Netgear switch that plugged into the router. S...

mbj · 04-12-2012

Sho INT GIG0/0MSA3800#sho int gig0/0GigabitEthernet0/0 is up, line protocol is up Hardware is BCM1125 Internal MAC, address is 0023.0470.a2d0 (bia 0023.0470.a2d0) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, ...

mbj · 04-11-2012

Added switchport nonnegotiate, no luck.

mbj · 04-10-2012

Checked and double checked. Also they are in the right VLAN for sure.

mbj · 04-10-2012

Cisco3750-a#sho cdp neigh detail-------------------------Device ID: MSA3800.msa-ps.comEntry address(es): IP address: 10.22.10.7Platform: Cisco 3825, Capabilities: Router Switch IGMPInterface: GigabitEthernet1/0/23, Port ID (outgoing port): Gigabit...

Member Since	‎04-10-2012 06:56 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	11

User Statistics

User Activity

Wacky Routing issue with VLAN

Wacky Routing issue with VLAN

Re: Wacky Routing issue with VLAN

Re: Wacky Routing issue with VLAN

Wacky Routing issue with VLAN

Wacky Routing issue with VLAN