Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have branch locations that have dynamic ip addresses that need to create a vpn connection to my PIX 515. I currently have the PIX setup with static crypto mymap statements that have the static ip address given by the ISP, but want dynamic to work ...
Hi all, Has anyone successfully used their usb ports on their router to connect to the WAN using an aircard?I'm looking for a cellular option to provide WAN connectivity to a branch location in a remote area.Any ideas?
Hi all, I cannot ping a server that has ip 62.15.25.25 from a server that exists on an Inside interface with the ip of 172.17.2.50. In our PIX 515, I have the following references to our references to either server.nat (inside) 2 172.17.2.50 255.255...
Hi all. We initiate an outbound FTP session with a bank. We receive an error :The remote host actively refused the attempt to connect to it". The bank stated that we need to open port 6100-6199 in order for this to work. This sounds very excessive...
Hi all. I have an 1811 router that connects two dissimilar networks.My question is, how can I verify that the 1811 is not allowing dhcp packets to pass through it? I realize that routers stop broadcast, hence dhcp, but how can I verify that if a no...
I do have global statements that look like this, but they don't reference the ip address of 172.17.2.50.global (outside) 2 xxx.xxx.xxx.xxxglobal (outside) 2 xxx.xxx.xxx.xxxglobal (outside) 2 xxx.xxx.xxx.xxxThese global statements only reference extne...
I found this statement in the PIX and I don't know what it does. Can someone explain what it does for me?nat (inside) 2 172.17.2.50 255.255.255.255 0 0I removed it from the PIX and my 172.17.2.50 server was then able to ping the 62.15.25.25 address...
