Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We have around 200 Remote locations connected to Core via some Distribution locations. I want to implement the IPSEC from edge Routers to the core Routers. So I want to know the best method of implementation for my requirement.
Hi all,We have a remote location and we are connecting through async dialup from central location. Now I want to restrict only central location number should should be accepted at remote location.can anybody help me out??????
Hi,We have a Remote location connected with Primary Leased line(Point to Point Link)and also a ISDN backup link for primary. Both the links are configured in OSPF network. Now my problem is whenever I making ISDN link up even though Primary link is u...
Hi,I have configured IPSEC Tunnel between my remote location to main location. And mapped to the serial interface. After this IPSEC is working fine. I am able to see the encryption and Dycription in "sh crypto engine conn active " command. But I am n...
I have configured a Tunnel between Cisco 2821 and Nortel Passport 2430. And tunnel is on a VSAT media. There is no physical link between these routers. Tunnel is showing up but LAN to LAN pinging is not happening. Please can anybody help me out.........
Hi rick,ISDN is configured as Point to Multipoint network. And it is used for backup for leased line.And also both are terminated in the same router. Actaully we want to use this ISDN for load-sharing purpose whenever leased line bandwidth is fully l...
Hi Rick,Thanks for your valuable comments.I will look in to all your suggestions and I will let you know. But here I just want to tell you that we are trying to telnet from 172.16.200.0 subnet to the remote branch ethernet(172.16.6.1). So we should b...
