Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have a vMX Small acting as a one-arm concentrator. It has an Azure public IP but there is no firewall upstream of it. We want to either 1. deploy a second vMX as an edge firewall + Client VPN server (50 max client vpn tunnels is and 200m...
In our datacenter, we have these devices:MX250 HA pair - Edge firewall and Cisco Secure/AnyConnect VPN. Also hosts a DMZ vlan, and management vlan.MS350 stack - L3 for all other subnets in the datacenterMX250 pair - one-arm concentrator SD-WAN hubTh...
Hello,I'm attempting to deploy the latest Cisco Secure Connect client to our users that work remotely. I've created an Application in SCCM that utilizes msi files and a cmd script as the installer. I've been successful in getting the software to in...
I'm attempting to create a recovery process ahead of applying a firmware update to a switch stack consisting of two MS350's. They are the only switches in the network. Current firmware is 16.8. Other switches in our environment have already been b...
Is anyone seeing similar traffic patterns like below on SD-WAN packet captures on an MX68W? Are the private IPv6 addresses standard Meraki SD-WAN BGP?I'm seeing retransmissions like this in captures at multiple sites.
Thanks for the reply! That is the current set up, although it wasn't always that way (was track by IP in the concentrator + switch network). I don't know when this issue began, but I am seeing clients from a remote site (MX250 pair as an SD-WAN spo...
Thank you, although this is proving difficult. In the Installation Program field, I'm specifyingpowershell.exe -ExecutionPolicy Bypass -File "Install-SecureClient-PowerShell-Test.ps1"I have the ps1 file and ServiceUI.exe as part of the content.The p...