About topalotaNo

topalotaNo · 08-22-2024

Hello,I'm trying to automate the backup of our cisco switches (SX550X). Firmware is 2.5.9.54.Here's my ssh-client config. ip ssh-client key rsa generate ip ssh-client authentication public-key rsa ip ssh-client server authentication ip ssh-client ser...

topalotaNo · 01-25-2024

Hello,I work for a company where there is 6 stack-SX550-24FT cisco switches as core switches. The stack play the role of the LAYER 3 router as the company do not have any firewall (currently setting up new firewall to replace the LAYER 3 role)For sec...

topalotaNo · 02-27-2023

Hello,I just joined a new company where PXE Booting never worked, i'm trying to fix it but I am stuck at some point. The switches are Cisco SX550X and L3 enabled for VLAN Routing Management.There is 3 VLANS in my case.VLAN 115 - DHCPVLAN - 192.168.20...

topalotaNo · 08-22-2024

I found the issue ! It was pretty easy... As I registered the username already in the ssh-client settings with the public key auth method. The switch was not expecting any username nor credentials, just the IP address of the target server after the s...

topalotaNo · 08-22-2024

Without password in the scp command:copy startup-config scp://admin@10.1.1.100/CISCOSX550.txt include-encrypted The copy operation has failed Copy: scp: Invalid format of user authentication.This command does not generate any log on the SSH server, ...

topalotaNo · 08-22-2024

I can authenticate through public key to access the switch remotely. But I can not scp from the backup server because there is no scp/sftp server on the switch. The only method to backup with scp is from the switch to the backup server with ssh-clien...

topalotaNo · 08-22-2024

There is no log from server side when I try to execute the command without password, like it didn't even try to execute the command and did not even do the scp command.copy startup-config scp://admin@10.1.1.100/CISCOSX550.txt include-encrypted The co...

topalotaNo · 06-03-2024

Hello,I happened again and It seems to be a broadcast storm or something like this.I noticed that Stormcontrol is disabled on the 6 stack switches, should I enable this ?

Member Since	‎02-27-2023 05:07 AM
Date Last Visited	‎08-30-2024 01:19 AM
Posts	12

User Statistics

User Activity

Cisco SX550X - copy conf scp not working with CLI, working with GUI

SX550-FT24 Stack rebooting in loop due to remote logs from servers

SX550X - issue with ip helper-address to PXE Booting

Re: Cisco SX550X - copy conf scp not working with CLI, working with GU

Re: Cisco SX550X - copy conf scp not working with CLI, working with GU

Re: Cisco SX550X - copy conf scp not working with CLI, working with GU

Re: Cisco SX550X - copy conf scp not working with CLI, working with GU

Re: SX550-FT24 Stack rebooting in loop due to remote logs from servers