Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Roberto,You should be able to do this, you need to do NAS filtering on the basis ofIP-based access restrictionand select the routers where you want to deny those group of users.ThanksSujit
Hi,Can you please change this lineaaa authentication ppp default if-needed group radius to aaa authentication ppp default group radius Can you get us the following debugs.debug radiusdebug aaa authendebug aaa authordebug aaa per-userdebug vtemplateLo...
Hi,Yes this is possible, even if you are using EAP-MD5, it will assign different vlans based on different userid you login with , even from the same machine.ThanksSujit
Hi,Can you please provide us the config on the router and the following debugs.debug aaa authendebug aaa authordebug aaa accountingdebug aaa per-userdebug radiusThanksSujit
Hi Prem,Here is good link to configure IAS server to use with VPN concentrators.http://www.cisco.com/warp/public/471/vpn3k_ias.html#steps-2As far as routers are concerned the config on the IAS server remains same, so you can use the above link.Thanks...
