About an_kafazov

an_kafazov · 12-12-2005

Hi,I just bought an used cisco 3600 router and I am trying to configure it but I encountered the following problem. The router boots up and stops responding. The following lines keep coming out:*Feb 28 17:28:23.426 cst: %IP_SNMP-3-SOCKET: can't open ...

an_kafazov · 01-14-2006

It turns out, the router works fine, but the cable that I made caused the problem. I tried with another cable that has been tested and I could input from keyboard, log into rommon and change the password.

an_kafazov · 12-15-2005

Hi,well, you might be right, since I made the cable myself and I have no experience. I followed the instructions on this page:http://www.cisco.com/warp/public/794/600pinout.htmlI have no other one to test with, neither do I have another router. I wil...

an_kafazov · 12-14-2005

Hi,The router is cisco 3600.I did get into ROMMON mode after removing the flash chip. But still, no input from the keyboard is accepted, no matter the terminal emulation or the software. Therefore, I am not able to change the register or do any confi...

an_kafazov · 12-13-2005

Hi Scott,Thank you for the advice. I did try several terminal programs including the ones you recommended but it still does not drop into rommon mode. I also tried different emulation setting, VT52, VT100, ANSI, ... but it didn't work either. I still...

Member Since	‎12-12-2005 01:58 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

cisco 3600 cannot boot into ROMMON

Re: cisco 3600 cannot boot into ROMMON

Re: cisco 3600 cannot boot into ROMMON

Re: cisco 3600 cannot boot into ROMMON

Re: cisco 3600 cannot boot into ROMMON