Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 1800 Series switch connected to a 3560 Series switch. The purpose was to easily create (dhcp from the router) and seperate two networks. I can ping from network A through the router to the 3560 switch, but no further. And in reverse, noth...
I have call manager express configured and i'm able to make calls from one lan to another. i'm not able to get calls to roll to voicemail unless they are VOIP calls made on the same lan. any suggestions? voicemail is configured. if i configure a ...
I've got the static routes in there. But i can only ping the 3560's ip address, nothing behind it. but from the 3560, i can ping all devices behind the 1800 router. I don't think i have a serious need for routing protocols. I'm thinking about NAT a...
ok. here goesCisco 1800 Fa0/0 (local Lan) 172.17.100.1/24. DHCP From the router 172.17.100.1. Fa0/1 is a point to point connection to the 3560 switch. Local ip address is 172.16.100.1/30 The switch is connected to the router on gig0/6. this port ...
