Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am receiving the following error on a 7206VXR with a NPE-300 installed:ROM: DIMM 0 is not the factory fixed/supported 32MB DIMM!ROM: Please replace DIMM 0 with the original 32MB DIMM.Can I just order a new MEM-SD-NPE-32MB for this slot, or does it ...
I need to back up the IOS on my 3662 to a Flash Card. The "sh flash" shows c3660-i-mz.121^[O-5.T.bin. The "dir flash:" from the ROMMON mode shows c3660-i-mz.121-5.T.bin. I received the following error when I try to copy either file to slot1: (No ...
I need to back up the IOS on my 3662 to a Flash Card. The "sh flash" shows c3660-i-mz.121^[O-5.T.bin. The "dir flash:" from the ROMMON mode shows c3660-i-mz.121-5.T.bin. I received the following error when I try to copy either file to slot1: (No ...
I have a PIX-520 and I cannot tell what type of license is on it. Can anyone tell me how to find out? Here is the sh ver:pixfirewall# SH VERCisco Secure PIX Firewall Version 5.0(3)Compiled on Sun 23-Jan-00 21:59 by pixbuildFinesse Bios V3.3pixfi...
I have a 3640 that is giving me the following message when it is booted:No fault history 0xffffffff. Need 11.1 (2) or higher ROM.Slot1 will then come up as disabled. The cards in the 3 other slots work fine. The ROM version that is running is 11.1(...
Thanks for your help. I tried your suggestions, but I received the same results. I think I will get new IOS for the router.Router#copy flash: slot0:Source filename [c3660-i-mz.121^[O-5.T.bin]?Destination filename [c3660-i-mz.121^[O-5.T.bin]?Erase s...
I received an email from a great guy named Tim who said I needed to put the IOS images in the top level directory, i.e. C:\ instead of some subdirectory. I moved the images, and also changed the TFTP root directory to C:\. This IOS images transferred...
I received an email from a great guy named Tim who said I needed to put the IOS images in the top level directory, i.e. C:\ instead of some subdirectory. I moved the images, and also changed the TFTP root directory to C:\. This IOS images transferr...
Thanks for the reply. I am copying and pasting the IOS image name, so they are identical. I am also including the .bin extention. It is very wierd. It seems the router can not open the IOS image that I downloaded from Cisco. I have checked the n...
Thanks for the reply. I do not believe this problem is related to oversized boot file images. I think that is some sort of TFTP problem. I have never seen this before. I can only load IOS's that I have taken directly off routers. I cannot downlo...
