Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a couple of 6500 and 3 couples of 4500.Each couple of 4500 is connected to the 6500s this way (since I am not sure of the ASCII results: it should look like a SQUARE! )6500A ---- 6500B | | | |4500A ---- 4500BI have to ...
Hi all.I just 'inherited' a CW2000/VMS platform, which should collect information from 2 ISDM-2 modules.The info I obtained is: the server and ISDM IP addresses have been modified.After that point they stopped functioning properly.From what I could s...
Hi all.We have a problem with PAT on a PIX-535 (Cisco PIX Firewall Version 6.3(3)132).The first two PAT rules work well.We configured a third rule (nat-id 3), and it seems like we are unable to link together the nat and global statement.global (outsi...
Hi all.I had a lot of trouble while trying to configure windows vpn clients to connect to an internal network through a PIX.W98 clients could not authenticate on the microsoft domain, while w2000 clients authenticated themselves and therefore accesse...
Hi, thanks for your answer.Yes, the server has been rebooted, and its name did not change.Under the "Cisco Secure Post Office" section I see this parameter:szIpAddr=x.y.z.116x.y.z.116 is the old IP address which is supposed not to appear in any place...
That sounds interesting, and we are investigating if this bug could be related to our problem...Unfortunately, we cannot remove the bi-directional nat, because it is configured over production PIXes.We will try that in a test environment ASAP.Thank y...
I tried compiling a new kernel, 2.4.22, but nothing changed: still not associating to the AP.[if you want to re/compile the kernel you need to check the"Network Device Support > Wireless LAN (non hamradio) > Wireless LAN + Cisco Aironet PCMCIA" optio...
