Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
According to the datasheet that we downloaded previously, the Network Essentials license supported automation features. However, in the latest datasheet, this feature is no longer mentioned.
This discrepancy is causing confusion for our customer. Cou...
Hi community,
The EU customer has raised a question regarding why the device IE-9320-22S2C4X-E, in particular, and Cisco IE Series devices in general, do not come with a power cord included and why there is no specific SKU available for the power cor...
Hi everyone,
Our Firepower 1120 device shows a blinking amber light on the power LED when powered on, while all other LEDs remain off. In addition, we are unable to access the console screen.
We have attached a video showing the current behavior of t...
Hi community,
Could you please let me know where I can find the latest Cisco Start Catalog for 2025, similar to this one:https://www.cisco.com/c/dam/m/en_sg/cisco-start/assets/pdfs/cisco-start-catalog-connect.pdf
Thank you in advance for your help.
Hi everyone,
Regarding the backup power for the C8200-1N-4T
Whether the PWR-CC1-150WAC can be used as a backup for the built-in power supply on the C8200-1N-4T device, or if it is only intended to support the PoE module?
Thanks
Dear @Enes Simnica ,
Thank you.
Do you have any official documentation or announcement from Cisco regarding this matter? Our customer is requesting an official explanation from Cisco.
Hi @Leo Laohoo
This is firmware:Cisco IOS XE Software, Version 17.09.06Cisco IOS Software [Cupertino], C9800-AP Software (C9800-AP-K9_IOSXE-UNIVERSALK9-M), Version 17.9.6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopy...
