Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,Please find the topology attached. (All routers Cisco 3725)
I am able to communicate from EIGRP routers to RIPv2 routers. Issue is I am not able to communicate from EIGRP/RIPv2 routers to Static configured routers.Not able to communicate to R...
Cisco c1710 Routers (Please find the attachment of the simple topology)No routing protocols are configured yet.R1#show ip interface briefEthernet0 10.0.0.1 YES NVRAM up upFastEthernet0 192.168.1.100 YES NVRAM up upR2#show ip interface briefEthernet0 ...
Hi @MHM Cisco World Thank you, Now i am able to ping with all routers.
on R2 added ip route 0.0.0.0 0.0.0.0 fa0/0on R3 added ip route 0.0.0.0 0.0.0.0 fa0/1
Hi @Furlo I have just verified the configurations. I have found that switch 2 interface GigabitEthernet0/2 is still belongs to the default VLAN, which needs to be add in VLAN 10.Compared screenshot, left one is switch 3(which is working fine as you d...
Hello @MHM Cisco World @Kanan Huseynli @Georg Pauwen Thank you for the response.Issue got resolved after changing the Router model from c1710 to Cisco 3725.I found there was a duplex mismatch with my switch port.
Hi @MHM Cisco World The c1710 router port fastEthernet 0, I can configure the speed but there is no option for duplex configuration.On the other side (i86bi_Linux-L2-Adventerprisek9-ms.SSA.high_iron_20190423) Switch port ethernet 0, I can configure t...
