About martgombert

martgombert · 05-05-2012

Hi all,I'm a bit new to Cisco, it's been 7 years ago that I passed my CCNA. I'm setting up a new network at my home and can't get it working.I have a Linksys E4200 that is connected to the internet.I have a Cisco 3560G-48TS for my virtualisation proj...

martgombert · 05-06-2012

How can I check that?

martgombert · 05-06-2012

From a Windows XP client behind the dvSwitch (attached to port g0/34) in VLAN130: c:\> tracert 8.8.8.8Bezig met het traceren van de route naar 8.8.8.8 via maximaal 30 hops1 2 ms 2 ms 2 ms 192.168.130.12 * * * Time-out bij opdracht.

martgombert · 05-05-2012

That's how I started, but it dont work. If I make it no switchport and give it an IP address also the computers in VLAN1 dont have access to the internet.Sent from Cisco Technical Support iPhone App

martgombert · 05-05-2012

Switch#Sh ip int bri vla1Interface IP-Address OK? Method Status ProtocolVlan1 192.168.1.2 YES manual up upSwitch#Sh ip int bri gi0/1Interface IP-Address OK? Me...

martgombert · 05-05-2012

I didn't change the VLAN of port g0/1. I now changed VLAN1 to this:interface Vlan1description Link naar E4200 (router)ip address 192.168.1.2 255.255.255.0And maked g0/1 default. Still no internet on the other VLAN's.I use the E4200 for DHCP on 192.16...

Member Since	‎05-05-2012 01:27 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

Connect a 3560G to a linksys E4200

Connect a 3560G to a linksys E4200

Connect a 3560G to a linksys E4200

Re: Connect a 3560G to a linksys E4200

Re: Connect a 3560G to a linksys E4200

Re: Connect a 3560G to a linksys E4200