Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey all-TL:DR is mobility group between foreign WLC (AirOS) and anchor WLC (9800) appears to have CONTROL path UP and DATA path down.Foreign: 5520 on 8.10.185.0 and 8540 on 8.8.125.0Anchor: 9800 on 17.9.4aBackground: Our enviroment has 10+ foreign WL...
Hello all,I have multiple regional locations w/ 5520 WLCs. These WLCs are connected to a Nexus 9k (Services) -> Catalyst 9k (CORE) -> Router. The associated APs are connected to access switches -> CORE -> Router. I have a Guest Wireless SSID set up w...
Hello all,We currently have a set up for our Guest Network using ISE web auth that looks something like this:AP -> Foreign WLC -> ISE Auth -> Anchor WLC (DMZ) -> Switch -> RouterEverything works fine, but users are able to access any website/URLs - w...
Hey all - for our old set up between AirOS -> AirOS we allowed UDP 16666 for tunnel control traffic · IP Protocol 97 for user data traffic. We had to adjust our FW rules with the new anchor 9800 WLCs to allow UDP 16667. Once done, the data path came ...
Thanks for the response. This happens every time a user connect to the guest network on one of the 5520 WLCs. I also have two 8540 WLCs in our 2 main locations set up with the same configuration and they work successfully. Yes, I have the setting you...