About jamato123

jamato123 · 02-03-2006

I have one catalyst 3550 switch that feeds three buildings via direct fiber connections to each building (each building as several catalyst 3500xl switches)I want each building to have a vlanbuilding 1 = ip ranges from 10.0.8.1 - 10.0.15.255 (loca...

jamato123 · 02-06-2006

thanks!we will try it and see what happens.one thing though, will my application servers be able to communicate with my other vlans as the config is written.the 3550 manual mentioned using a secondary ip address commandie - interface vlanX ip add...

jamato123 · 02-06-2006

ok, looked at the 3550 today, looks like the 3550 has all my buildings currently on one vlan. So I have been looking through a 3550 manual, plus what have have learned from this forum I have come up with the config listed below (I did not put any cgm...

jamato123 · 02-04-2006

I do not see any directions or any links for the instructions?I use zenworks imaging (novell), though I am always interested in better and free ways.

jamato123 · 02-04-2006

so the config on the 3550 would look something like this?interface Ethernet 1ip address 10.0.8.1 255.255.248.0interface Ethernet 2ip address 10.0.16.1 255.255.248.0ip helper-address 10.0.8.21interface Ethernet 3ip address 10.0.24.1 255.255.248.0ip he...

Member Since	‎02-03-2006 11:16 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

How to setup iphelper and cgmp

Re: How to setup iphelper and cgmp

Re: How to setup iphelper and cgmp

Re: How to setup iphelper and cgmp

Re: How to setup iphelper and cgmp