About MriduD

MriduD · 09-25-2024

Hi Team, I am trying to migrate the configuration from a CISCO 891 IOS router to CIsco 1121 IOS XE router.It is a pretty old router and has Cisco VPN client configured on it.Can we configure the same on the CISCO IOS XE 1121-4P router?Refer to the di...

MriduD · 06-04-2024

I changed the public ip address on a Cisco WAN router. Made the changes under webvpn gateway as well. Now the issue is user is able to connect to anyconnect and can ping the lan gateway but cannot ping or reach any of the servers. However, when he co...

MriduD · 05-31-2024

we have a policy-based site-to-site VPN between cisco router and palo alto. But the tunnel goes down and doesn't come up after the IPsec lifetime is expired. And tunnel only comes up after sending traffic from cisco to palo alto and not the other way...

MriduD · 05-13-2024

Hello all, I need your help to come up with a solution.A user is connected remotely to host location via flex Anyconnect remote vpn(vpn pool - 172.17.1.1 to 172.17.1.40). And also, there is a site to site VPN between the host location(192.168.1.0/24)...

MriduD · 03-27-2024

Hello All,I have a Cisco 1121-4P router running IOS XE 17.9.4a and I dont see the channel group option under any of the 4 switchports. The option shows up in WAN port, but I would like to utilize two switchports for the same VLAN and keep it under th...

MriduD · 09-25-2024

Thank You, Sir. I am aware that anyconnect can be configured on 1121 routers but I just wanted to check if the older version Cisco IPSEC VPN client can be configured on it. So, that I don't have to go to every computer and replace the VPN clients wit...

MriduD · 06-05-2024

Thank you sir @balaji.bandiI manage both the cisco router and the panorama. But, i am still a newbie, still learning and a lot to learn. If the cisco ip sla wouldn't have worked, I would have tried setting up tunnel monitoring as advised by @paul dri...

MriduD · 06-03-2024

Hello sir, Actually, i configured ip sla on the Cisco side... Tunnels look stable now . I would still keep an eye on the connectivity. If they do down again, I shall let u know. Ok?

MriduD · 06-03-2024

Tunnels have been stable so far after configuring ip sla on the Cisco side

MriduD · 06-02-2024

Do you want to look at the configuration on the PA side?

Member Since	‎04-18-2023 12:36 PM
Date Last Visited	‎10-14-2024 05:33 AM
Posts	68
Total Helpful Votes Received	3

User Statistics

User Activity

Cisco VPN Client Configuration on a CISCO 1121-4P IOS-XE router

Anyconnect issues

Site to site VPN between Cisco router and Palo alto

Flex Anyconnect vpn and site to site VPN

Channel group command not available in switchport

Re: Cisco VPN Client Configuration on a CISCO 1121-4P IOS-XE router

Re: Site to site VPN between Cisco router and Palo alto

Re: Site to site VPN between Cisco router and Palo alto

Re: Site to site VPN between Cisco router and Palo alto

Re: Site to site VPN between Cisco router and Palo alto