Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having trouble understanding how to set antenna orientation.We have an outdoor mesh consisting of 1500's. When I add APs to a WCS outdoor map and attempt to set the antenna azimuth and elevation the resultant heat maps don't look right...The ant...
I have a MARS 20 version 4.2.3(2403). I'd like to upgrade to the latest which I believe is 4.3.4.2804. Is it accurate that I need to step through each interim upgrade between the two to acheive my goal ?TIA
So, if I understand, the azimuth should be set to 0 degrees for an omni (this is confirmed in the release notes as well).I'm still having trouble with the elevation; 0-180 degrees, either up or down. Can you recommend settings for an AP, 65 from the...
It does make sense but let me add a little more detail...What we have is site A with a slow link to site B. The equipment at site B (ASA 5510) is staying in place. We added a new ASA 5510 at site A and want to test a new, faster link to site B from...
Thanks for the reply.What we have is an L2L tunnel between sites A and B of low bandwidth. We are upgrading the speed of the connection on new equipment and would like to run both L2L VPNs at the same time between sites A and B.If we can't do that I...
