Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have two network object groups as follows:inside_group_A with hosts ranging from 172.16.10.10 to 172.16.10.15 (configured with Static NAT for services such as Mail and Web).inside_group_B with hosts ranging from 172.16.10.20 to 172.16.10.30 ...
Hi friends,I have a Firewall 5520 with 3 interfaces: Inside (Host: 172.16.10.0/24 and GW: 172.16.10.2) Outside (119.202.193.81) and DMZ (182.16.10.1)I did connect LAN cable on the Server (182.16.10.99) direct to GigabitEthernet0/2 on Firewall ASA 552...
Hi everyone,I'm using ASA Cisco 5520 with 2 interfaces: inside (172.16.10.x) and outside (119.202.193.80/28)My Local Host IP is 172.16.10.200 can not Ping or Access to the Public IP (119.202.193.87) of Host 172.16.10.100, but can Ping/Access the Inte...
Dear @Dev Vishwakarma I tried to use SCP to upload the ASDM image file to ASA 5520 via local IP but it seem failed (tried with different directories still the same). Please show me how to fix it. I need ASDM installed on my ASA 5520. Thank you very m...
Hi @Flavio Miranda inside group A & B use different network IP ranges for Static NAT.example:inside_group_A: IP from 172.16.10.10 to 172.16.10.15 --> config Static NAT go through outside_A interface (201.93.x.x/28)inside_group_B: IP from 172.16.1...
Thanks all. The DMZ Interface status Down may be related to the cable (maybe it needs cross cable because the DMZ port connects directly to the Server's GigabitEthernet port). So I will try to seek help if needed. Thank @MHM Cisco World & @Sheraz.Sal...
Hi @Sheraz.Salim the DMZ security level is already set is 40. You can take a look at the files name Cisco show run ...One more thing, I don't know why the status of the DMZ Interface is Down, I did check DMZ Interface status is Enable in the ASDM -> ...
