About robcoc

robcoc · 03-07-2003

Hi, I have a 3640 with 2 NM-4T and 1 NM-1E2W with a WIC-1T installed. The problem is that the line protocol on the serial connection of the WIC-1T never goes up, even if all the criteria of the link are up. I changed the NM-1E2W with a new one, but...

robcoc · 03-11-2003

Hi, here there is the output of sh int s0/0 and sh ver. The other end is connected to a 1603R. I tried with both encapsalation (HDLC and PPP).Thank you.RobertoSerial0/0 is up, line protocol is down Hardware is QUICC Serial Description: Vignola I...

robcoc · 03-09-2003

Hello, it's not a link problem, now the line is working with a 1603 instead of the 3640.Bye and thank youRoberto

robcoc · 03-09-2003

Hi, yes I tried both the wic slots.And from the link you send me I see that the WIC-1T should work....what I think now is that I will change the NM slot where the NM-1E2W is.ByeRoberto

robcoc · 03-07-2003

Hi Leo, the link you send me is about the VWIC-1MFT-T1 and not the WIC-1T.Maybe there is a misunderstanding.Thank youRoberto

Member Since	‎03-07-2003 03:16 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

WIC-1T in NM-1E2W on 3640

Re: WIC-1T in NM-1E2W on 3640

Re: WIC-1T in NM-1E2W on 3640

Re: WIC-1T in NM-1E2W on 3640

Re: WIC-1T in NM-1E2W on 3640