Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am confused with applying access list in interfaces. Any helps/information links will be much appreciated.(1)The access-list applies on interface Outside will control the incoming traffic from internet to "inside" or to "DMZ" interface? (2)When the...
Hi, I am trying to configure PIX 515E for int/ext/dmz but am facing some problems that need your kindly helps. I have no problems to configure the int & external (tested successfully) but I am confused on the DMZ configuration after adding a mail rel...
Hello, need helps on video conferencing.I have mapped a public IP to an internal IP for our Polycam video cam device. I want to allow remote branch to initiate video conference calls. Configuration added to my PIX (version 6.2)is:static (inside,outsi...
I have just configured a PIX Firewall 501 (using PAT) to allow internal PCs using Windows PPTP connect to a remote PIX successfully (need to open port 1723). Is there any setting/port that I must configure for Cisco VPN client in order for IPSec VPN ...
Yes, I have read the document and actually entered the setting but to no avail. static (dmz,outside) mail_relay 10.0.0.2 netmask 255.255.255.255 0 0static (inside,dmz) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 0 0access-list outside_access_in...
Thanks for your help. I will try it out and let you know if it works. Yes, it is a typo error mail relay 10.0.0.2). There are still some things need your help to explain if you don't mind:(1) We host the domain name (DNS MX record) with external hos...
Fixup protocol for H323 is already there. But remote site users sometimes have difficult time to connect. I am using PAT for all outgoing traffic. Will it be the reason, since video conference calls might use some UDP ports and those ports might not ...
I am a bit confused here. What do you mean PIX access lists only work for inbound traffic to the interface? Could I apply access lists for outbound traffic? If I have a mail relay server at DMZ zone, do I have to apply any access lists at DMZ interfa...
I have already added this command, but it didn't work. After making connection, the screen on the client PC shows that it is verifying username and password, and then return error "Remote computer does not respond"
