Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone! Android client can't connect to the l2tp/ipsec isr4431/k9 server with isr4400-universalk9.16.06.04.SPA.bin image and securityk9, ipbasek9, appxk9 licenses. Windows clients work correct.the same Config list below successfully work on l...
Hello, I configured time on my FTD like this:1) Devices -> Platform settings -> Time Synchronization -> Set my clock via ntp from x.x.x.x (IP of ntp server).2) Devices -> Platform settings -> Time zone -> Time zone: my time zone (+3 for my case). Aft...
I have two FTD 2110 devices. There are in a high availability pair. Sometimes they switches automatically for the reason: Inspection engine in other unit has failed due to snort and disk failure (detailed information in the picture). Cisco Fire Linu...
I had the same problem with disabled DAI. In logs I discovered: Host X.X.X (MAC address) in vlan 15 is flapping between port Gi0/21 and port Gi0/14. This problem continue not a long time. That's why I didn't have time to try to disable one of the int...
General OS:AAA Authentication debugging is onAAA Authorization debugging is onAAA Local debugs debugging is onAAA Radius debugs debugging is onIOSXE Conditional Debug Configs:Conditional Debug Global State: StopIOSXE Packet Tracing Configs: L2TP:L2T...
