About cstn

cstn · 05-26-2023

Hello Community, I have put the following IPSEC config together. It must be wrong because the tunnel is not showing up. ASA1======conf t! rename Management nameif to outsideP2pconf tint Management 0/0nameif outsideP2p! enable crypto ikev1crypto ikev1...

cstn · 05-28-2023

Great news! I gave up trying to build an IPSEC VPN between two Cisco ASAs. Instead, I built one between a Palo Alto 850 and a Cisco ASA 5585 and it came right up. Man out of all the VPNs I've built before (Fortinet, Palo Alto and Cisco ASA), Cisco's ...

cstn · 05-27-2023

ASA1======conf t! ISAKMP Phase 1crypto ikev1 policy 10authentication pre-shareencryption aeshash shagroup 2lifetime 86400!crypto ikev1 enable outsideP2ptunnel-group 10.10.12.2 type ipsec-l2ltunnel-group 10.10.12.2 ipsec-attributesikev1 pre-shared-key...

cstn · 05-27-2023

Done. IPSEC still isn't working. Is there a way to build a virtual interface that will come up no matter what on the ASA? Any other interface, I'm going to have to cable something up. That was the reason for trying to use a loopback originally.

cstn · 05-27-2023

Ok. I rebuilt the config as shown below. If you see something that is wrong, can you explain why is it wrong so I can make proper modifications?ASA1======conf t!interface Management0/0management-onlynameif management_interfacesecurity-level 100ip add...

cstn · 05-27-2023

I did change the subnets on either side and this did not resolve the issue. ASA1======conf t! create tunnel interfaceinterface Tunnel1nameif insTun1ip address 10.10.12.1 255.255.255.0tunnel source interface outsideP2ptunnel destination 10.244.7.16tun...

Member Since	‎05-26-2023 05:10 PM
Date Last Visited	‎05-31-2023 12:02 AM
Posts	8
Total Helpful Votes Received	2

User Statistics

User Activity

IPSEC VPN (l2l) not coming up

Re: IPSEC VPN (l2l) not coming up

Re: IPSEC VPN (l2l) not coming up

Re: IPSEC VPN (l2l) not coming up

Re: IPSEC VPN (l2l) not coming up

Re: IPSEC VPN (l2l) not coming up