Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am testing my ISDN line and I seem to be getting the following errors when I do a -debug isdn events- :00:10:20: ISDN BR0: Physical layer is IF_DOWN00:10:20: ISDN BR0: Recvd MPH_DEACT_IND from L100:10:20: ISDN BR0: L1 is IF_ACTIVE00:11:12: ISDN BR0...
Thanks for the answer. We use EAP-Fast with a configured User on the WLC. If you will check the Box from the advanced tab "FlexConnect Local Auth" we have extreme voice problems, even when you are at the same position. The connection breakes down wit...
Hi George,I have a similar Problem and we use Cisco 7925G phones. The phones are authenticating via a local user on the WLC. APs are connected via flex connect. a the message log from the wlc I see the following error, wich is from the phones: AAA Au...
BRI0 is up, line protocol is up Hardware is BRI with S/T interface and POTS MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Open Op...
