About VisAviS

VisAviS · 06-21-2023

Hello. I'm new in work with Cisco. Please help me with the configuration of the ir829 router with the built-in wireless module ap803. I need to get internet access on ir829 from another router (non-Cisco) through the dot11radio0 interface. I used the...

VisAviS · 06-23-2023

Please find attached my last config files.

VisAviS · 06-23-2023

As I understood from the NAT (PAT) manuals, "Here, any match interface with access-list 1 will be translated with overload to the outgoing interface IP address of Router 1."In my case, the outgoing interface IP address of IR829 is 192.168.1.1, which ...

VisAviS · 06-23-2023

I already tried only VLAN1.!ip nat inside source list 1 interface Vlan2 overload!access-list 1 permit 192.168.0.0 0.0.0.255There is no internet connection again.I noticed that when I ping 192.168.1.1 from my laptop (192.168.0.100), it goes through.Wh...

VisAviS · 06-22-2023

I tried to change the configuration as you instructed. Now it appears as follows:ir829:!ip dhcp excluded-address 192.168.0.1 192.168.0.99ip dhcp pool LANnetwork 192.168.0.0 255.255.255.0default-router 192.168.0.1dns-server 8.8.8.8!interface Wlan-Giga...

Member Since	‎06-02-2023 02:12 PM
Date Last Visited	‎07-04-2023 02:50 PM
Posts	5

User Statistics

User Activity

NAT(PAT) two VLANs on ir829 with wireless bridge

Re: NAT(PAT) two VLANs on ir829 with wireless bridge

Re: NAT(PAT) two VLANs on ir829 with wireless bridge

Re: NAT(PAT) two VLANs on ir829 with wireless bridge

Re: NAT(PAT) two VLANs on ir829 with wireless bridge