Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I am encountering the following issue.I am trying to ping from different contexts the real servers behind the ACE.I have configured on the interface of the Real Server outbound nat.I can see on the connection table that the icmp request is rec...
Hi All,We are running the ACE blade (A2.3.4) adn have the following configuration.A serverfarm configured:serverfarm host SF-GRG-Logger-7300 failaction purge probe GRG-Logger-7300 rserver GRG-LOGSRV-01 7300 backup-rserver GRG-LOGSRV-02 7300 ...
Hi All,We are trying to implement the ZBF on our router to assist us in limiting the intial impact of DDOS attacks.We have configured the below and it appears that it's not working, as when un der attack the statistics don't increae.Any assistance wo...
Hi,We will shortly be upgrading from ACE20 to ACE30.In the ACE30 Product Performance Specifications it states:SSL TPSUp to 30,000 TPS using 1024-bit keysCan someone please clarify the implications of the above?TIAJack Wikinski
Hi,Is anyone aware of any limitation on building an etherchannel on the abovementioned linecard, when bundling more than one port on the same card?The 4506 is using a 6L-E supervisor engine 12.2(54)SG1.If it's done on a 6500 with a WS-X6148-GE-TX lin...
Hi,Thanks for your help upto now.The issue I am having is I get an error message in the Fortigate logs saying invlaid password. I have checked this username and password with other equipment we have and it works well.Please find below the configurati...
Thanks for the prompt response.I am now encountering problems setting the av pairs.Below is my configuration:Any assistance would be appreciated.Thanks.Jack.
Hi All,I am attempting to set up authentication from Fortigate V5 towards ACS v4.2.I am trying to setup the attributes for noaccess and have run into an issue of:config system accprofile edit "noaccess" unset menu-file nextendI cannot do the...
Hi Daniel,Thanks for your reply.What I wanted to know is if there was any mechanism to automatically clear these connections once the primary device became active again and the secondary was standby?Regards.Jack.
Hi,If I understnd you correctly you wish to manage the ACE via the GUI as well as the CLI.The only way to do this is to use a product called ANM (Application Networking Manager).In the setup you can specify http, https access. the toll allows you to ...
