Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys!We need help with two WLCs, one with a free license and another with 27 APs licenses.Currently, we are trying to change these WLCs one for another so we can use the WLC Licensed.When we disconnect the current WLC and connect the new one, the ...
Thanks, @Rich R, that worked perfectly! We could join the APs by only running that command to ignore the certificate and then changing the date and time to a date before the certificate's expiration. Something to add:Under the Old WLC (unlicensed), w...
Thank you! I'll run the command on both WLC, and then next week, we are planning a maintenance window to switch to the other WLC. I already apply the command config ap cert-expiry-ignore mic enable on the new WLC.And disabled NTP, when we are ready t...
Do you know which cert I should be looking for? I see from this post: https://www.wiresandwi.fi/blog/cisco-wlc-or-ap-device-certificate-expired-what-you-can-doThat I should check the Certificate Name: Cisco SHA1 device cert; if that is so, then I cou...
Sorry for the late response, i was out. Here are the outputs on the other WLC (the one with the license) (Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name................................
See the output here:AP#sh capwap client rcbAdminState : ADMIN_ENABLEDOperationState : UPName : AP5SwVer : 8.3.150.0HwVer : 1.0.0.0MwarApMgrIp : 1.1.2.1 (This IP is the OLD WLC we want to remove)MwarName : Cisco_c0:6f:c4MwarHwVer : 0.0.0.0Location : d...
