Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I'm trying to configure a shared infrastructure with VRF light for two imaginary customers.
* R2 & CRB2 have identical BGP configuration such as same ASN, WAN IP, BGP router id and network advertisement.* I have created two separate VRFs at R...
Hi all,My P2P l2vpn xconnect is not coming up. I trying to figure the problem out. What am I missing? hostname XR1interface Loopback0ipv4 address 192.168.100.2 255.255.255.255!interface GigabitEthernet0/0/0/0ipv4 address 10.0.200.6 255.255.255.252!in...
Yes, it did appear (pink colored). One of the paths not advertised (Red colored). Other one is fine (Blue colored). R5(config-router-af)#do sh ip bg 172.16.1.0/24BGP routing table entry for 172.16.1.0/24, version 150Paths: (2 available, best #2, tab...
R3--- (global RT) -----R6--- (global RT) ----R5It's because, R5 has only one peer R6 sharing global routing table. Let me give you a bit more information; please consider R2 & CRB2 are separate customer residing two VRFs "A" & "B" respectively at R5....
Hi MHM,The prefixes are already in different RDs. I have added the multipath as well, nothing got changed unfortunately. Current BGP configaddress-family ipv4neighbor 198.51.100.6 activateneighbor 198.51.100.6 send-community bothneighbor 198.51.100.6...
