Hi all,
I have the following test topology for transit AS configuration.
I cannot ping loopback IP addresses of ISP test 1 and test 2 from any of my internal routers as well as test 1 cannot reach to test 2.
pr1_bl#sho ip bgp rib-failure Netwo...
Hi Priyank,
As Marvin mentioned, the spec you provided is for SR modules while your original post was on LR modules. I like the details he provided, so I think the subject optics are compatible.
10GBase-SR SFP supports short link lengths and is th...
Hi Priyank,
I think these two should be compatible. As much as I remember, I have used SFP-10G-LR with XFP-10GLR (don't remember if it was exactly XFP-10GLR-OC192SR) and they worked for me.
I would suggest you should check the optical and electri...
Hi Jon and Richard,
Okay, I was incorrectly redistributing routes on Test_1 and Test_2 that is why pr1 and pr2 was showing BGP routes with admin distance 200 in the routing table. I removed the redistribution and simply used the network commands on...
