Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have a 5520 WLC with software version 8.3.150.0. Two dynamic interfaces is configured for guests, seperated because they are for customers in two different countries. We have intermittently been losing connection to our external DHCP-server fr...
Hi,
I need to set up a Guest Portal for a customer using Cisco ISE + Cisco 5520 vWLC. I have created a redirect ACL under Security -> Access Control Lists, but I guess I'm trying to figure out how the ACL is applied to the specific Guest SSID.
- The ...
Hi, thanks for the reply.
We created a lab-host in the same subnet as the Dynamic interface (10.11.0.0/16) and sent a DHCP-request packet to the DHCP-server, with Wireshark enabled on lab-host. But we havent used packet capture from the DHCP-servers ...
Hi,
The guide assumes FlexConnect local-switching but I don't want to activate that for this customer. To get a general idea for how the WLC is setup:Dynamic interface 1 which has no problems at all:
VLAN Identifier: 120
IP Address: 10.10.0.10
Netmas...
Sorry for not clarifying, but yes the APs are in flexmode with central switching. I'm not sure exactly what you mean, but you want me to have the DHCP-server in the same subnet as the WLC?