Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I would like to know if it is possible to let Cisco VPN client from the Inside to connect on outside vpn servers throught a pix while at the same time connecting this pix with another pix in a Site-To-Site VPN.I know that ESP doesn't use ports nu...
HiI have 2 sites connected by an IPSEC VPN (using pix firewalls) and one of the pix (Site 1) accepts connections from pptp clients.Is it possible for the pptp clients connected to site 1 to access site 2 using the site to site vpn ?Thank youFred
HiI would like to know if this configuration is possible:I have 2 devices at the entrance of the internet: 1st is a PIX Firewall and the other is a VPN Concentrator 3000. EZ Vpn client connect to the vpn concentrator. I would like to have traffics de...
Hi, I would like to know if you can configure Downloadable ACL with Windows 2000 server's Radius, and if so, if anyone has a link to how to configure the Windows 2000 Radius.Thank youFrederick Laquerre
--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...
The 2621 has 64mb of RAM and 16mb of flash. When we do some testing (http/ftp download accross the router), the cpu gets as high as 95%. I don't know if a 2621 should be able to do more than 4-5MB/S transfers, but it seems if I use an IP only IOS, I ...
Thanks for the answer., but like I said in my post, when I get to the tinyrom image, I get to the prompt boot> (that is not privileged mode). When I try to do a set command, or anything like undelete, It says I don't have the permissions. the only th...
Since the 831 is a new router using hardware encryption, there is only 2 versions available for this router. Both uses one of the latest 12.2 ED IOS.For the sonicwall, I don't have access to this router since it's owned by another company. But I know...
