Issue: Guest SSID clients are intermittently unable to authenticate due to delay between the client and the DHCP server (diagnosed by TAC through traceback logs messages received from WLC's and debug information presented to TAC)
Design: Foreign an...
Hi,
I have manipulated the QOS bronze class applicable to our wireless Guest network, to 802.1p tag to equal 1 (AF11) on the Cisco WLC configuration - see attached pic.
The silver class applicable to Corp Traffic has been left to default values, ...
I recently upgraded our Flex 7500 WLC to software version 8.1.131.0 for the requirement to be able to configure Anchor controller redundancy. Now I can see on this version of code, you can set an anchor controller priority to 1-3 (1 being the highest...
Hi,
Specifically around DHCP is there an option or some other configuration required for a client tunneled to an Anchor controller to force the client to use the DHCP servers configured under the WLAN on the Anchor controller and not receive a DHCP I...
If you issue the show port summary command on a Cisco Wireless Lan Controller show port sum STP Admin Physical Physical Link LinkPr Type Stat Mode Mode Status Status Trap POE -- ------...
Thanks let me try set that up. DHCP proxy is enabled.
Previously I was running version 8.1.131.0 on the anchor and the foreign controller. Downgrading the code to cisco recommended 8.0.133.0 on the foreign controller made no difference.
Interesting thanks
I'm running flexconnect mode (centrally switched) for the guest network and my objective is to mark all traffic on this SSID with the AF11 class under the bronze qos profile.
I'm also running flexconnect mode (locally switched) fo...
Just coming back to this topic, what if you want your AP to be the starting point of your trust boundary...
So my understanding of our previous discussion and my general understanding of Cisco QOS, first I should clarify:
- if a packet arrives a...
Thanks!! So with version 8 (which we are running), what they saying is the 802.1p configuration under the QOS profiles is irrelevant. You just configure trust dscp between your WLC and connected switch, as well as on the trunk interfaces to to wifi a...
