Dear all I have one problem with Port Channel, the network topology is as follow : -- two Core switch C9407R connected with VSS-- two FPR 1150 as (Active-Standby) with port no. 8 -- Creating port-channel ID:13 between the core switch and FW 01 ...
I try this solution but also not workingI solve this issue by rebooting the firewall and the port channel comes up with two ports working fineIt looks weird but it's working fine now
The problem now, why this port is not coming up !!! The loop should not exist as both ports in Channel group and the two core switch in one logic domain
