About CSteve

CSteve · 09-04-2023

Hi.Currently at my job we had a long power loss, and neither one of our ap s cannot register to our wlc 2500 series. I m scratching my head with this problem , and i m out of ideas. Any input would be appreciated.Some info: (Cisco Controller) >show a...

CSteve · 09-04-2023

I set the year to an earlier date, and the aps could join. Looks like the certificates are not valid, because they are older than 10 years, as i ve read in a previous post. I should upgrade to FUS version 1.9 or higher, so i could disable the lifetim...

CSteve · 09-04-2023

Romania. Gmt +3. Already set Baghdad as timezone, which is in the same timezone as Romania.

CSteve · 09-04-2023

The message logs on the controller are filled with :*spamApTask3: Sep 04 15:43:09.099: #DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:681 Failed to complete DTLS handshake with peer 192.168.5.56*spamApTask3: Sep 04 15:43:08.982: #DTLS-3-HANDSHAKE_FAILURE:...

CSteve · 09-04-2023

Unfortunately i can t connect to the AP's , not on ssh , nor on telnet. If i try to connect to it on http i get the following message: The AP is not in FlexConnect mode. Check if these commands can help (on the controller) : ...

CSteve · 09-04-2023

All of the APs are air cap 16021 e k9(Cisco Controller) >show timeTime............................................. Mon Sep 4 14:54:25 2023Timezone delta................................... 0:0Timezone location................................ (GMT +3:...

Member Since	‎09-04-2023 01:16 AM
Date Last Visited	‎02-23-2024 12:38 AM
Posts	6

User Statistics

User Activity

WLC 2500 AP registration problem

Re: WLC 2500 AP registration problem

Re: WLC 2500 AP registration problem

Re: WLC 2500 AP registration problem

Re: WLC 2500 AP registration problem

Re: WLC 2500 AP registration problem