Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I'm having an error while validating the UCS environment in the HyperFlex Installer.The error is:Reason: 'FabricSubGroup' object has no attribute 'oper_state'The only probable cause that I can think of is the fact that the uplink from the FI to th...
Hi,I have an Ironport set up with my 6500 through WCCP.It seems to be working ok, but I have a question.Right now, I'm only redirecting a specific VLAN (let's say 40).I can filter the traffic ok, but I'm seeing the it's also redirecting traffic inter...
Hi,I have a server "published" to the outside interface with a static NAT.I've set up a DMZ, and I need it to access that "published" server through it's translated address.The DMZ has a dynamic NAT rule, using the outside interface IP address.My acc...
This is the access-list I'm using.Each line corresponds to a different VLAN.Extended IP access list IRONPORT 10 permit tcp 10.180.4.0 0.0.0.255 any (8 matches) 20 permit tcp 10.180.2.0 0.0.1.255 any (3 matches) 30 permit tcp 10.180.1.0 0.0.0...
