Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,router ip 192.168.9.1 directally connceted to 192.168.9.254 (fa0/1 of layer 3 switch). vlan ip 172.16.30.254/23i can able to ping 192.168.9.1 if my source is 192.168.9.254 (fa0/1 of layer 3 switch)i am not able to ping 192.168.9.1 from switch i...
Hello,i have MPLS connection taken from our ISP. my local isp has given me a range 192.168.9.x/24. due to some reason, i have created vlan 172.16.30.x/23.. default route of switch is set to 192.168.9.1/24 (ISP router in our end).i can not able to sen...
Hello,i have MPLS connection taken from our ISP. my local isp has given me a range 192.168.9.x/24. due to some reason, i have created vlan 172.16.30.x/23.. default route of switch is set to 192.168.9.1/24 (ISP router in our end).i can not able to sen...
i have a branch located in one of the regional location. To connect my branch with my company network. i have taken mpls line from our service provider.In my branch office i have installed a layer 3 switch. Since we want to segregate my lan. we have ...
We have multiple cisco cat 2900 switches. all switches dont have cascade cable port in back panel. i want some sort of solution to manage those switch remotely. any suggestion guys??
Thank you all for reply.yes we can create multiple vlan using transparent mode. if i'm not making mitsake that i have to create vlan in every switch, rather than creating a vlan on each switch i preferred to use switch clustering. so i can manage all...
Thanks Hitesh and John for your post.sicne my client switches are in vtp client mode i cannot crete a vlan and since its layer 2 switch we cannot assign ip to interface.my switch model is cisco WS-C2960-48TT-L. can it is possble to use software like ...
