Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all!!!I need organize 2 type of access between 2 asa 5510 - site 2 site and Remote access. VPN Peers are same for both situation.One of peers has IP address 1.1.1.1 and another has 2.2.2.2 ( sw version 9.1(3) )peer 1.1.1.1 has 192.168.1.0/24 netwo...
Hi all!I have remote access VPN issue, like this description (link is below):Cisco Device: ASA 5510 Security plus IOS: 9.1.(3)It's a very common issue and generally happens when you try to connect the VPN client from the same location which has a si...
Dear All!!Need to configure connection limitis for LAN behind asa. What quantity I must use :per client per client embrionic totally Per clientper client embrionic(For which interface)To providing them internet access (http, https, pop3, pop3s, smtp...
Hi all!Qustion about 877 K9 dls router.I have 2 vlans: 10.10.10.0 255.255.255.240, switchport FE0 and 10.10.20.1. 255.255.255.240 switchport FE1.for my dsl link i use IRB config with dinami ip address.internet connection works for both vlans.I have ...
Hi all!Qustion about 877 K9 dls router.I have 2 vlans: 10.10.10.0 255.255.255.240, switchport FE0 and 10.10.20.1. 255.255.255.240 switchport FE1.for my dsl link i use IRB config with dinami ip address.internet connection works for both vlans.I have ...
Hi Roman!Thanks for reply.I have solved this issue via STATIC_NAT:I create nat rule - when users try to connect via RA VPN - their IP is different from outside interface's address.
Solved.Static Nat is solution.I have created rule as follows: nat (inside,outside) source static 192.168.1.0_24 2.2.2.2 destination static 172.16.1.0_24 172.16.1.0_24 no-proxy-arp
Cisco 800 series or above - for example cisco 881 or equivalent.http://www.cisco.com/c/en/us/products/routers/800-series-routers/models-comparison.html But Do you need only VPN solution? no more?
Does anybody have solution of these errors?%ASA-6-713905: Group = UserGroup, Username = User, IP = A.A.A.A, Skipping dynamic map SYSTEM_DEFAULT_CRYPTO_MAP sequence 65535: cannot match peerless map when peer found in previous map entry.%ASA-3-7130...
