Dear All,We are experiencing packet loss when ping from PE1 to CE2 when the traffic above 7.2Mbps.CE1 - PE1 - PE2 - CE2 Type of point-to-point between PE2 and CE2 is 4x E1 multilink (bandwidth 8192Kbit).Note*** (PE1 to PE2 no packet loss)We do see th...

Hi ,Can we limit the number of users login to the VPN?eg. The group-policy A has 50 accounts configured in a Radius server. But we only allow 20 accounts/users login to the VPN concurrently.Any way to achieve the above request?Thanks & Regards,

Hi All,I have a ASA5520 installed with the AnyConnect VPN Client setup. Noticed that the maximum mtu size is 1406 bytes inside the tunnel. Would like to know if this is normal behavior for ASA? Can we adjust the mtu size to let say 1472 or 1500 bytes...

Dear all,I am facing issue on setting up the port-channel between ASR1004 and a switch. I have to configure "port-channel load-balancing vlan-manual" command to bring the channel up. But by doing that, the port-channel become active & standby mode wh...