About mecker

mecker · 10-10-2023

Hi, i have a Problem with the VPN. The VPN Connection from a Windows Client works. I become a IP Adresse from the ip local pool l2tp-pool 192.168.0.210 192.168.0.230. But i can not ping the Router or Client in the Tunnel. Here mehr Config. When a sta...

mecker · 10-10-2023

Hi, @drozen789 you have accepted the solution. Work the Access to the Lan? I have the same config an the securityk9 License installed. The Tunnel is on but no connection to Lan is possible.

mecker · 10-10-2023

@Rob Ingramhad been made, the object group has been changed, see in my post.

mecker · 10-10-2023

Hi, here the command i change - no changed, same problem not ping.object-group network VPN-IP-Pooldescription Local IP for VPNrange 192.168.46.50 192.168.46.60ip local pool l2tp-pool 192.168.46.50 192.168.46.60Client:PPP-Adapter L2TP VPN Kern:Verbind...

mecker · 10-10-2023

@Rob Ingram Here the output. Yes the encaps und decaps increasing.CiscoKern#show crypto ipsec sainterface: GigabitEthernet0/0/1Crypto map tag: outside_map, local addr 192.168.1.115protected vrf: (none)local ident (addr/mask/prot/port): (192.168.1.115...

mecker · 10-10-2023

Hi, thanks for the Info, but there was a extended ACL. I have delete this and create an new and change the nat Command to. But there is no changed.ip nat inside source list nat interface GigabitEthernet0/0/1 overloadip access-list extended nat10 deny...

Member Since	‎10-09-2023 10:59 PM
Date Last Visited	‎10-30-2023 12:08 AM
Posts	7
Total Helpful Votes Received	1

User Statistics

User Activity

VPN Tunnel IPsec work but not pinging

Re: VPN L2TP/IPSEC CAN'T CONNECT TO LOCAL NETWORK

Re: VPN Tunnel IPsec work but not pinging

Re: VPN Tunnel IPsec work but not pinging

Re: VPN Tunnel IPsec work but not pinging

Re: VPN Tunnel IPsec work but not pinging