About ken129gem

ken129gem · 11-19-2015

Hi, The output of show version includes a line containing the bootstrap version: ROM: System Bootstrap, Version 12.3(8r)YH9, RELEASE SOFTWARE (fc1) What is the location (flash: , system: , etc.) of this bootstrap file? The filename should be somethin...

ken129gem · 10-08-2015

Hi, I have a Cisco 1811 ISR running IOS version 15.1(4)M10. I'm using NAT NVI for port forwarding to a couple of servers on my local network: ip nat source list 1 interface FastEthernet0 overload ip nat source static tcp 10.0.0.15 22 interface Fast...

ken129gem · 09-12-2015

Hi, I have a Cisco 1811 Integrated Services Router running Cisco IOS version 15.1(4)M10. There is a modem connected to FastEthernet0 and a few devices connected to the switchports (FastEthernet2-9). I used the following command to forward some servic...

ken129gem · 11-22-2015

Hi Masoud, Thank you for the information.

ken129gem · 11-20-2015

Hi Masoud, Is it possible to access the boot flash on any of the Cisco 890 Series routers?

ken129gem · 11-20-2015

Hi Masoud, Thanks for your reply. Those URLs are helpul. However, I was hoping to backup the current bootstrap to a TFTP server before upgrading it. To use the copy command, the location of the current bootstrap file must be known. Is there any way t...

ken129gem · 10-21-2015

Hi Milan, Yes, this is the exact command: ip nat source list 1 interface FastEthernet0 overload I agree, those entries should be shown in the NAT NVI translation table during normal operation. They disappear when the problem occurs, and they re...

ken129gem · 10-19-2015

Hi Milan, Thanks for your response. I was curious as to why those NetBIOS packets were appearing in the NAT NVI translation table. If they are being broadcast throughout the network, where does xx.xxx.xxx.xx:36 (the public IP address) come into place...

Member Since	‎09-12-2015 07:37 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	19
Total Helpful Votes Received	5

User Statistics

User Activity

Location of the bootstrap file on a Cisco router?

NAT NVI entries are being disabled randomly? IOS bug?

How to do NAT reflection (NAT hairpin) on a Cisco 1800 router?

Hi Masoud,

Hi Masoud,

Hi Masoud,

Hi Milan,

Hi Milan,