Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an odd problem on our network where our mac-address tables on our endpoint switches are filling up very quickly. At first I thought it could be mac-flooding, and started to investigate which part of the network this could be coming from, howe...
Hi all,I'm having an issue on my network where intermittently users are being denied access to the network because dot1x authorization is failing (at least that's what it looks like). I'm mainly seeing this on Windows wired clients, but I think that ...
I'm trying to setup a switch so that it will send a non-dot1x supplicant to a guest vlan so that they can retrieve and install the dot1x configuration files. Then once they reauthenticate they get authorised by our NAC system which works via freerad...
Yes, all of our vlans are in the same bridge group. I don't know why it's like this, perhaps something from a legacy setup. I've now removed a few vlans from the group with no obvious degradation in service, so I'll continue to remove the vlans out o...
I think you may have pointed me in the right direction actually. Removing my wireless vlan out of the bridge-group 1 has dramatically decreased the amount of entries in my end user switch TCAM.I think tomorrow I will remove all vlans from the bridge ...
This is the output of that command from my endpoint 2960:sh sdm prefer The current template is "default" template. The selected template optimizes the resources in the switch to support this level of features for 0 routed interfaces and 255 VLANs. n...
