Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone ever get this error before?conf tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)# fcalias name LM_212 vsan 101Switch(config-fcalias)# member interface fc1/26 swwn 20:00:00:0c:cc:g8:21:c1 ...
IHAC who is running 3.2.2c in his enviorment. 4 MDS Switches. If we Set the Banner Motd on the switch it works fine for Telnet . But not SSH putty or SecureCRT? In my Lab i can get it to work fine? on Both Telnet and SSH . His putty is set to all def...
Is there a document for or Best Practices Guide for Merging two Cisco MDS Fabrics together Via ISL or EISL ? Such as Zonenames have to be unique? Domain Id's? Principal switch and so on ? Thanks
Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.module-2# show port-config internal all (This command wil differ of earlier versions of SAN OS )Mar 20 08:53:45 2011 00449...
You must globally enable NPIV for all VSANs on the MDS switch to allow the NPIV-enabled applications to use multiple N port identifiers. Note All of the N port identifiers are allocated in the same VSANEnable NPIV mode on the NPV core switch:switch(c...
Thanks Mike This is all i could really find. I cant believe none of the Cookbooks have any of this info. http://www.cisco.com/en/US/products/hw/ps4159/ps4358/products_tech_note09186a00802205ff.shtml
