About miguelespinosa

miguelespinosa · 11-19-2023

I'm hoping there is someone that might be able to help me with my issue. I followed the guide down below to create an SSID that would do CWA for a client with ISE 3.2. My WLC is 17.9.4a.https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-980...

miguelespinosa · 11-21-2023

Let me try to get that for ya. Is it possible that using a test machine with an ethernet connection screw up my results? I am not physically in the office, and work remotely. Would it be better to use a client that is strictly on the wireless?

miguelespinosa · 11-20-2023

Yeah, I was noticing that as well. It does the DNS lookup for the FQDN but never tries to connect to it. I'm assuming why there isn't any hits. Not sure if you can see that in my packet capture.

miguelespinosa · 11-19-2023

I'll review it, and see if I missed something. Otherwise I will open a TAC case. I appreciate all your help.

miguelespinosa · 11-19-2023

It is ISE 3.2 with patch 3, and WLC is 17.9.4a. This is what I see in 39. It is the fully qualified name. on 43 it is doing a dns query for the FQDN of the ISE appliance. Sorry I was using a different wireshark, same results though

miguelespinosa · 11-19-2023

Yes, it does reach the page when i copy it the URL to the client. I do have ip http server, and webauth-http-enable is not in the config like the guide said. Is there anything that might be causing this? Or anything that might help shed light on this...

Member Since	‎11-19-2023 06:53 PM
Date Last Visited	‎12-09-2023 07:06 PM
Posts	8

User Statistics

User Activity

CWA - Not redirecting me

Re: CWA - Not redirecting me

Re: CWA - Not redirecting me

Re: CWA - Not redirecting me

Re: CWA - Not redirecting me

Re: CWA - Not redirecting me