Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'd like to mark incoming UDP packets with DSCP values on a 6509 with Sup720 3BXL. Incomming interface is a WS-X6748-GE-TX What I did is---------mls qosclass-map match-any UDPKRAM match access-group 100policy-map UDPKRAM_AF21 class UDPKRAM se...
I want that any udp packets arriving at gi3/3 get DSCP AF21, all others (that do not match the acl) should not be touched.Yes the marking should be kept when exiting any other interface. The port that forwards traffic is gi 5/1---interface GigabitEth...
Hey Jon,the main target is not to keep only the DSCP bits. It is:Mark "clean" pakets on the incomming port, route them, and get the marked pakets on the outgoing port.Keeping the dscp bits works, but not marking then in the incomming linecard.To disa...
