Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have a Cisco Prime Infrastructure 1.3 (1.3.0.20) with patch Update-1_12 and when do audit receive the message bellow. Internal exception while doing the audit. Please check the log files. Somebody know what specif logs should be checked? T...
Hi guys,I am trying to apply WLAN template from NCS to two WLCs 5508 and I receive this message."Another WLAN with same SSID and either WPA1/ WPA2/ WPA1+WPA2 is enabled. Please change the Layer 2 security policy."The template has layer 2 security wit...
Hi Folks,I have installed a WAE 512 with inline module between CheckPoint and FWSM Modulo on 6k.I am seeing the log below on WAE-Core. The IP 10.15.90.124 is my virtual IP on CheckPoint and the IP Address 172.16.40.10 is one cam device on my network....
Hi Guys,I'm needing some help to implement WAAS at a Catalyst 4500 in Hardware.I have 2 WAEs 512 at Main Office and 2 NM Modules at Branch Offices. The Branch connect to Main thru VPN. At remote sites I'm using ip WCCP in and out at LAN router interf...
I have a controller model 4402 and I need to connect it to 2 Catalyst 6500 for redundance.I have connected but stp did not work well. Does somebody know if is possible do thatTks
Hi Shaoqin,I had opened a TAC case and bellow is the solution provided that worked. Just readd wlc not work.."we discovered an existing internally found bug - CSCuh29586. I’ve edited the bug to be externally facing. As a work around we had to expor...
ShaoginThanks, just occur on primary wlc where APs are registered, its not SSO deployment. In the logs I can see error like this. It seems application problem, what do you think?The controller ip address is 10.251.XX.XX.Error in auditing lrad after c...
The problem is ok now.NCS was keeping information about older wlan with the same name that doesn´t exist on controller.I did audit controller to solve this issue.TksGilberto
Hi,About the license erro I found a bug on bugtoolkit like bellow.http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtc38874&from=summaryCSCtc38874 Bug Details "License Transport not been purchased" er...
Hi Zach,I have others connections that are Asymmetric.About your question, I have wccp configured only on interface that 172.0.0.59 belong. This network is from another site that came from LAN 2 LAN link trough an interface vlan. The 10.25.48.75 inte...
