Routing loop detected and Licence error

[gilbertojr]

Hi Folks,

I have installed a WAE 512 with inline module between CheckPoint and FWSM Modulo on 6k.

I am seeing the log below on WAE-Core. The IP 10.15.90.124 is my virtual IP on CheckPoint and the IP Address 172.16.40.10 is one cam device on my network. The same log appear from other 2 more devices.

2010 Aug 21 20:31:13 SAF-WAE-02 kernel: %WAAS-SYS-3-900000: 10.15.90.124:27549 - 172.16.40.10 :80 - opt_syn_rcv: Routing Loop detected - Packet has our own devid. Packet dropped.

The device doesn´t have direct connection to firewall Check Point. Can it be a bug?

Also,

I have this messages after upgrade to version 4.2.1.38. I have configured Enterprise license but still receive the message in all WAEs.

2010 Aug 21 14:11:20 WAE_Core exec_license: %WAAS-CLI-5-170098: The License Transport has not been purchased.

Have somebody seen this errors?

Tks

[mrjohnso]

I am also getting the license error message after upgrading to 4.2.1.  I have not been able to find anything on it.

[gilbertojr]

Hi,

About the license erro I found a bug on bugtoolkit like bellow.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtc38874&from=summary

CSCtc38874 Bug Details 

"License Transport not been purchased" error message is displayed 

Symptom:

"License Transport not been purchased" notice syslog message is displayed

if Transport license has not been configured

WAE device might have Enterprise license configured instead.

Conditions:

Set the syslog priority as notice level

(config)#logging disk priority notice

Workaround:

Configures syslog priority level as warning.

(config)#logging disk priority warning

I don´t have any idea about routing loop yet.

Gilberto