We are experiencing an unusual issue concerning SSH connections to Cisco 9200L switches. We recently migrated from Cisco 2960 switches to Cisco 9200L models. When connecting from the same network using a Linux server, SSH to the switches works succes...
We have Cisco FTD 1150 and I have established a site-to-site tunnel with a FortiGate device. FTD is situated behind (NAT) through an Internet Service Provider (ISP) modem, resulting in a private IP configuration. Despite configuring the connection ty...
The 9200L setup consists of a stack of three switches, connected as shown in the attached screenshot. All other 2960 switches have been replaced with 9200 models. Only one 2960 switch remains in the infrastructure, and it is the only one accessible v...
Yes, it feels like stabbing in the dark. I've never encountered such an issue before. The command "ip classless" is already configured, but the problem still persists.
Yes, there are two firewalls configured for HA. However, I do not believe the issue is related to the firewalls, because, as I mentioned, the old Cisco 2960 switch is still accessible from other networks. The issue appears to be with the 9200L switch...
